Metal Search

Site Search

LOG IN

If you don’t see what you are looking for please reach out to us directly at metalsales@industrialmetalservice.com

Choosing the Right Cutting Oil for Aluminum Machining

Aluminum, a softer metal with a relatively lower melting point than other materials, such as steel, poses a few specific challenges during cutting, grinding, and finishing. While some grades of aluminum cut smooth, others are gummy and can end up clogging tools. Intense heat coupled with friction generated during machining melts aluminum and makes it stick to the tool surface, causing the cutting edge to foul. However, the right cutting oil for aluminum machining cools down. It lubricates the machining region, flushes chips away, improves the surface quality of the machined part, increases the cutting speed, and decreases the tool wear rate.

Below, we discuss some common cutting oils for aluminum machining and why cut-to-order precision sawing services are ideal for fulfilling your aluminum machining requirements.

Types of Cutting Oils for Aluminum Machining

Before selecting a cutting oil for aluminum machining, consider the various properties of aluminum that can contribute to challenges during machining:

  • Coefficient of thermal expansion (CTE): The high CTE of aluminum causes the cutting heat to quickly expand to the workpiece, resulting in thermal deformation and reduced machining accuracy.
  • Oxidation: When exposed to strong acid or alkaline environments, aluminum develops an oxide layer. If the oxide layer is not removed before chip welding, it will lead to imperfections such as porosity or inclusions. The oxide layer can also cause material burn-through as the heat needed to remove it is higher than required for the base material below.
  • Pitting: Aluminum corrosion is characterized by small pits or holes on the surface. Pitting can pose a challenge for specific industrial applications where surface appearance is critical.
  • Ductility: During aluminum cutting, long strip cracks may form and block the cutting area. The cutting aluminum debris needs to be removed to improve smoothness and accuracy.

Based on these unique challenges, a cutting oil for aluminum machining should meet the following criteria:

  1. Excellent cooling performance: A cutting oil should address the heat buildup during milling, grinding, or turning while reducing temperatures on the workpiece and the cutting tool.
  2. Excellent lubrication: A cutting oil for aluminum machining should serve as a good lubricant and have strong anti-friction properties to move chips away from the cutter—yielding a smooth surface finish to the workpiece.
  3. Corrosion resistance: The cutting fluid should have outstanding corrosion resistance to prevent pitting on the aluminum surface.
  4. pH level: To prevent oxidation, the pH of aluminum cutting oil should be between 8.0 and 8.5.
  5. Anti-rust agent: The cutting oil for aluminum should contain anti-rust agents such as phosphate and sodium silicate to form an anti-corrosive film on the surface of the workpiece and maintain pH stability.

The major types of cutting oil used for aluminum machining include the following.

 

Top-Grade Aluminum for Every Purpose and Industry

New Aluminum Plate 6061

New Aluminum Rectangular Bar

All Aluminum Shapes

New Aluminum Plate 6061 New Aluminum Rectangular Bar All Aluminum Shapes
Customizable thickness: Measure in inches. You can get various options for all industry applications.

Can be cut to specific shapes and sizes: Excellent weldability to cater to unique project needs.

Corrosion resistance: Grades like 6061-T651 are perfect for marine hardware applications that require superior rust resistance.

Environmental resilience: Due to its heat treatable nature, 6061 aluminum does well in extreme conditions.

Wide selection of sizes and dimensions: Choose your sizes based on tensile strength, width, and weight.

Good machinability: It’s lightweight and high strength makes it flexible for a number of applications.

Reliable supply: Consistent, certified aluminum stock you can trust.

High-quality material: Superior-grade aluminum for precision needs.

Custom cuts: Accurate cuts down to thousandths of an inch.

 

Straight Oil

Straight oils have exceptional lubricating properties and are used in heavy cutting operations that require high chip removal rates. For aluminum cutting, straight oils with a base composition of petroleum or mineral oil in an undiluted form are best suited to keep the chips away from the milling tool and achieve a smooth surface finish. The viscosity of mineral oil-based cutting fluids can be further increased to let them flow more easily over the cutting zone. Lubricants such as vegetable oils, lard oil, kerosene, esters, and fats are all used for aluminum cutting.

Soluble Oil

Soluble oils are a preferred choice during aluminum turning, milling, drilling, threading, tapping, and reaming. Made by mixing mineral oil, water, and coupling agents, these cutting oils are great for providing lubrication. Soluble oils mixed to a consistency of 1 part oil to 20-30 parts water can make an effective cutting fluid for aluminum machining. Added emulsifiers and other additives can help disperse oil in water.

When it comes to successful aluminum machining outcomes, the concentration of cutting oil used is critical. Low quantities of cutting oil will lead to excessive heat and friction, resulting in the corrosion of the workpiece and cutting tool. Using more than required will lead to excessive residue forming on machining tools, staining the workpiece. Choosing the best cutting oil for aluminum machining, the exact amount to be used for operations, and the right cutting tools for a smooth finish is a challenge. A cost-effective alternative is to outsource your aluminum machining requirements to a team of experienced professionals with industry-leading sawing resources.

Outsourcing Your Aluminum Machining Requirements

At Industrial Metal Service, we handle your sawing requirements to help you accelerate production processes and reduce material wastage. Using our proprietary MetlSaw NF12-T12 and Amada PCSAW 530 X band saw with pulse-cutting technology, we conduct high-precision metal sawing to a fraction of an inch. Our cut-to-order precision sawing services can fulfill your aluminum needs whether you require a one-time order or regular project deliveries.

Industrial Metal Service has been a trusted metal supplier across the San Francisco Bay Area and beyond for over two decades. We understand the challenges of determining the right cutting oil for aluminum machining and can help you fulfill your metal-cutting requirements. Contact us today, and we will get it done—quickly.

Published by IMS Team

Industrial Metal Service has decades of experience and over 1.1 billion pounds of metal sold and recycled. Our founder, Jeff, has spent his life in the industry and prides himself on offering fair, efficient, trustworthy, knowledgeable, outstanding customer service. We offer metal salesmetal recycling pickup service, and other associated services, such as precise metal sawing, machinery teardown, and warehouse cleanupGive us a call and we’ll get it done.